ISO 14001:2026 — what changes and how to transition by April 2029

The new edition of the environmental management standard, ISO 14001:2026, was published on 15 April 2026. If your company is certified to the 2015 edition, your certificate is still valid, but the transition is now only a matter of time. The transition period is three years: the transition must be completed before 30 April 2029, and after that date accredited certificates to the old edition are no longer valid.

ISO 9001 is changing this year too: its new edition came out in September, and we wrote about it in ISO 9001:2026 — what changes and how to transition. Many of our clients hold both standards, which gives them a chance to handle both transitions in one go.

Key dates

  • 15 April 2026. ISO 14001:2026 is published and the transition period begins. The new edition replaces the 2015 edition together with the 2024 climate change amendment.
  • By 30 April 2027. The Accreditation Body of Serbia (ATS) transitions certification bodies’ accreditations to the new edition: bodies submit their declarations of readiness by 31 January 2027, and ATS makes its decisions by 30 April 2027 at the latest. A body can issue accredited ISO 14001:2026 certificates only once its own accreditation has been transitioned.
  • 31 October 2027. The last day for new (initial) certifications to the 2015 edition. After that, new certifications are issued only against ISO 14001:2026.
  • 30 April 2029. The transition period ends. The transition must be completed before this date, including issuing the new certificate. After it, accredited ISO 14001:2015 certificates are no longer valid, whatever expiry date they show.

These dates are set by Global ACI (Global Accreditation Cooperation), which took over the work of the International Accreditation Forum (IAF) in January 2026. They’re the same for all accredited certification bodies and are applied in Serbia by ATS. The Serbian standard SRPS EN ISO 14001:2026 was published on 29 May 2026. Certification bodies may set earlier internal cut-offs, so agree the date of your transition audit with your certification body in good time.

What changes

Let’s say it straight away: this isn’t a new standard. The structure is the same, the PDCA cycle is the same, and a system that works well today won’t need to be rebuilt. Global ACI describes the overall changes as minimal, and ISO says the new edition brings in the latest requirements for management system standards and clarifies requirements on key topics. The changes are more concrete than they first appear, though, and auditors will look for them.

  • Context of the organisation (4.1, 4.2). Climate change, added by amendment in 2024, is now part of the text of the standard itself. When analysing external and internal issues, the standard also puts more emphasis on other environmental conditions: pollution, biodiversity and the availability of natural resources. In practice: even if you conclude that some of these aren’t relevant to you, record that conclusion and the reasoning.
  • Risks and opportunities (6.1.4). The requirements on risks and opportunities have been moved into a new sub-clause, 6.1.4, and clarified, and Annex A explains in more detail how they link to the context and the other clauses. In practice: if your aspects register has doubled as your risk and opportunity assessment, check that it really covers risks and opportunities arising from the context, not just from aspects. You also need to show which opportunities you see, such as savings from using fewer resources or from circular economy measures.
  • Planning of changes (6.3). A new clause, and the one many will notice: changes to the environmental management system are carried out in a planned way. In practice: when you change a process, equipment, a site or your organisational structure in a way that affects the system, it’s good practice to keep a record showing that you considered the change in advance (its purpose, consequences and environmental impact), who was responsible for it and how it was carried out.
  • Life cycle perspective (6.1.2). The life cycle was already part of determining environmental aspects, but the new edition puts more weight on it: from sourcing raw materials to the end of a product’s life, including disposal. In practice: companies that have so far looked only at what happens inside the factory fence should extend their aspects register.
  • External providers (8.1). Instead of “outsourced processes”, the standard now speaks of externally provided processes, products and services. In practice: operational control covers more ground, so control over suppliers and contractors needs to be more systematic.
  • Internal audit (9.2.2). Every internal audit must have defined objectives, not just a scope and criteria. A small point, but an easy one to forget in the audit plan and report.
  • Management review (9.3). The management review clause is now split into sub-clauses: general (9.3.1), inputs (9.3.2) and results (9.3.3). In practice: check that your management review template covers all the inputs and results.
  • Documented information (throughout). The wording is aligned with the Harmonized Structure: instead of documented information being “maintained” or “retained”, the standard now says it must be available. In practice: the substance doesn’t change, but align the wording in your procedures and checklists.

How the transition works

The process is similar to the one for ISO 9001:

  1. Gap analysis. We compare your existing system with the new requirements, clause by clause.
  2. Plan and responsibilities. The analysis produces a plan: what changes, who is responsible and by when.
  3. Updating documentation. Most of the work is usually in the context analysis, the aspects register, the risk and opportunity assessment and planning of changes.
  4. Training. Mainly for management and internal auditors.
  5. Internal audit and management review. You audit your system against the new edition before the certification body arrives.
  6. Transition audit. The certification body usually carries it out alongside a regular surveillance or recertification audit, but it can also be a separate audit, even a remote one. The certification body decides whether extra audit time is needed; at a recertification audit, which covers the whole system, it may not be.

How long it takes

In our experience, for a company whose system works well, preparation usually takes 30 to 60 days. It takes longer where the aspects register was drawn up once and hasn’t been opened since.

The most practical approach is to align the transition with your next planned audit, provided your certification body is accredited for the new edition by then. A good time for a gap analysis is a few months before your next surveillance audit.

If you also hold ISO 9001

Both new editions follow ISO’s Harmonized Structure for management system standards, so some of the changes are common to both: objectives for each internal audit, planning of changes (a new clause in ISO 14001, an expanded one in ISO 9001), changes to management review and new wording on documented information. Both editions also restructure the requirements on risks and opportunities, but in different ways. That’s why it makes sense to do both transitions together, with one gap analysis, one internal audit and, if your certification body allows it, one visit. It saves time, and money too.

Just watch the deadlines. For ISO 14001 the transition must be completed before 30 April 2029, and for ISO 9001 before 30 September 2029, so for a joint audit the earlier deadline applies. Your certification body also needs accreditation for both new editions: ATS makes its decisions for ISO 14001 by 30 April 2027 and for ISO 9001 by 30 September 2027.

Frequently asked questions

Is our ISO 14001:2015 certificate still valid?

Yes, until the expiry date on the certificate, and no later than 30 April 2029. After that date it’s no longer valid, whatever expiry date it shows.

Do we have to rewrite everything?

No. The existing system is refined, not rebuilt.

We’re only now implementing ISO 14001 — which edition should we use?

The new one. That way you avoid a transition in two years’ time. Just keep accreditation in mind: certification bodies accredited by ATS can issue accredited certificates against the new edition only once ATS has transitioned their accreditation, and ATS makes those decisions by 30 April 2027 at the latest. If you need a certificate sooner, for a tender for example, you can still get one to the 2015 edition, provided your certification body issues it by 31 October 2027 — so book the audits early. Such a certificate is valid until 30 April 2029 at the latest, and the later transition then takes little work, because your system already meets the new requirements.

Next step

Don’t wait until 2029. The closer the deadline, the fewer audit dates certification bodies have available, and a rushed transition rarely delivers anything beyond a new certificate.

If you’re certified to ISO 14001:2015, and especially if you also hold ISO 9001, start with a gap analysis. See how we implement ISO 14001 or request a quote and tell us when your next audit is, and we’ll come back to you with an estimate of scope and timing. Everyone on our team works in English, and we can prepare your documentation in English, Serbian or both.

Sources

  • ISO 14001:2026, Environmental management systems — Requirements with guidance for use, International Organization for Standardization — iso.org/standard/14001
  • Global ACI-TECH-3-TR 2029-04-30 (M), Transition Requirements for ISO 14001:2026, version 1.0, 4 September 2026 — global-aci.org (PDF)
  • Accreditation Body of Serbia, transition plan for accredited certification to SRPS EN ISO 14001:2026 (Plan prelaska na akreditaciju za sertifikaciju prema SRPS EN ISO 14001:2026), 28 October 2026 — ats.rs (PDF, in Serbian)
  • Institute for Standardization of Serbia, SRPS EN ISO 14001:2026, published 29 May 2026 — iss.rs